Lubrication Free Guide Units – Cụm dẫn hướng không dầu

Lubrication Free Guide Units – Cụm dẫn hướng không dầu

Lubrication Free Guide Units - Cụm dẫn hướng không dầu

Slide shifter guide rail S type (GR)

[Features]
· Demonstrates excellent performance in environments with dust and contaminants.
· Allowable static load: The allowable load that can be handled at static and near static speeds (0.0017 m/s, 0.1 m/min or less).
· Allowable dynamic load the allowable load at speeds from 0 m/s to 60 m/min.
· For STC20 please avoid horizontal-facing and reverse suspension installations.

Slide shifter guide rail SE type (GRE)

Demonstrates excellent performance in environments with dust and contaminants.

Simplified Slide Rails-Aluminum/Oil Free

DryLin W double rail, assembled product (oil free type), rail alone

Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.

[Features]
· When two rails are set up in parallel, one side uses a floating bearing.
· Choose the optimal setting and mount method for fixed / floating bearing from horizontal, vertical, and side mounting.
· This setting and mount method prevents the linear guide eating into other materials and getting blocked due to parallel measurement error.
· For the floating bearing, set the amount of play with consideration for the amount of expected measurement error.
· This provides a certain amount of play on one side.
· The floating bearing is bi-directional during assembly.

DryLin W Linear Guide Assembly Product (Non-Lubricated Type) Carriage Component

Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-02-17 Assembly Set

AN extremely thin and compact linear guide system. Optimal for simple uses, with easy mounting. Maintenance-free

Oilless slide shifter BA type (BTCA)

A roundtrip linear movement guide unit with excellent resistance to abrasion, loading, and contaminants.
[Features]
· Uses an aluminum housing. Compact and lightweight design. Can be used in any orientation such as horizontal or vertical.

Oilless shaft holder (for BC/BF type)

[Features]
· A slide shifter shaft support that serves as a roundtrip linear movement guide unit. Provides excellent resistance to abrasion, loading, and contaminants.

Oilless shift table (for the BF type)

[Features]
· A shift table for use with BF type slide shifters.

Slide shifter shift table SE type (STE)

Demonstrates excellent performance in environments with dust and contaminants

DryLin W single rail round type (no oil supply type) carriage unit

Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.

[Features]
· Simple mounting with no maintenance required.
· This zinc diecast carriage and slide is a slide bearing for use with the DryLin R JUM model.
· Can be operated without lubricant, so no dust gets mixed into oils.
· Lightweight with low noise operation.
· High moment load capacity.
· Appropriate for use with single rail systems.
· Excellent dust resistance.
· Flat and wide surface area for supporting high moment loads.
· Can be installed in a variety of spaces.
· Operates without lubricant at a low friction coefficient.
· Strong and friction resistant, and doesn’t corrode.
· Low noise specifications

Oilless #500 guide unit BT type

A dedicated roundtrip movement guide unit with high durability that uses an OILES bearing in the slide part.
[Features]
· A guide unit with high rigidity for strength.
· Products are available in a wide range of internal diameter and length measurements.

DryLin W single rail square shape type (no lubrication type) carriage unit

Puts installation space to effective use. Provides extensive protection against outside elements through maintenance-free and oil and lubricant free properties, as well as resistance to dust, water, chemicals, and shocks.

[Features]
· Simple mounting with no maintenance required.
· This zinc diecast carriage and slide is a slide bearing for use with the DryLin R JUM model.
· Can be operated without lubricant, so no dust gets mixed into oils.
· Lightweight with low noise operation.
· High moment load capacity.
· Appropriate for use with single rail systems.
· Excellent dust resistance.
· Flat and wide surface area for supporting high moment loads.
· Can be installed in a variety of spaces.
· Operates without lubricant at a low friction coefficient.
· Strong and friction resistant, and doesn’t corrode.
· Low noise specifications

Oilless shift table (for the BC type)

[Features]
· A shift table for use with BC type slide shifters.

Metal Scraper (MS)

Optional component compatible with OILES slide shifter BC/BF types and OILES guide unit BT/BK types.
[Features]
· This metal scraper (MS standard) attaches to a guide shaft and is used to remove weld spatter, grease, and other materials stuck to the shaft.
· Uses a phosphor bronze coil scraper.
· When mounting a metal scraper to the BC type, no dust seal (DS) can be embedded.

Dust Seal (DS)

Optional component compatible with OILES slide shifter BC/BF types.
[Features]
· When mounting a metal scraper to the BC type, no dust seal (DS) can be embedded.

Slide shifter shift table SE type (STFE)

Slide shifter shift table S type (STC)

Slide shifter shift table S type (STF)

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-02-17 Carriage Component

AN extremely thin and compact linear guide system. Optimal for simple uses, with easy mounting. Maintenance-free

DryLin T Clearance Adjustment Type (Oil Free Type) TK-01 Carraige Single Item

[Features]
· A linear guide that’s functional even in severe environmental conditions. Lightweight with simple mounting. Provides extensive protection against outside elements through maintenance-free properties and resistance to dust, water, chemicals, and shocks.
· The carriage features manual gap adjustment.
· Maintenance is not required, and it operates without lubricant.
· Excellent corrosion resistance.
· A rail made from anodized aluminum.
· For standard symmetrical hole arrangement, C5 = C6

DryLin N Thin Linear Guide Non-Lubricated Type_NK-20-80 Carriage Component

[Features]
· An extremely thin and compact linear guide system.
· Optimal for simple uses, with easy mounting.
· Maintenance-free.

DryLin T Miniature Type (Non-Lubricated Type) TK-04 Carriage Component

[Features]
· A linear guide that’s functional even in severe environmental conditions. Lightweight with simple mounting. Provides extensive protection against outside elements through maintenance-free properties and resistance to dust, water, chemicals, and shocks.
· Maintenance is not required, and it operates without lubricant.
· Available three size types.
· The carriage is made from zinc diecast with chromate treatment.
· The slide part is made from iglidur J-polymer.
· A rail made from anodized aluminum.
· Mounting height and width are small.
· Excellent corrosion resistance.
· For standard symmetrical hole arrangement, C5 = C6. *Colors vary slightly due to coating thickness.

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-02-80 Rail Component

AN extremely thin and compact linear guide system. Optimal for simple uses, with easy mounting. Maintenance-free

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-02-80 Assembly Set

DryLin T Clearance Adjustment Type (Non-Lubricated Type) TK-01 Assembly Set

A linear guide that’s functional even in severe environmental conditions. Lightweight with simple mounting. Provides extensive protection against outside elements through maintenance-free properties and resistance to dust, water, chemicals, and shocks.

[Features]
· The carriage features manual gap adjustment.
· Maintenance is not required, and it operates without lubricant.
· Has excellent corrosion resistance.
· This is a rail made from anodized aluminum.
· For standard symmetrical hole arrangement, C5 = C6.
· Colors vary slightly due to coating thickness.

DryLin T Miniature Type (Non-Lubricated Type) TK-04 Rail Component

DryLin N Thin Linear Guide Non-Lubricated Type NK-01/02-27 Carriage Component

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-01/02-27 Rail Component

DryLin T Miniature Type (Non-Lubricated Type) TK-04 Assembled Product

DryLin N Thin Linear Guide Non-Lubricated Type NK-01/02-40 Carriage Component

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-01/02-40 Rail Component

DryLin N Thin Linear Guide (Non-Lubricated Type) NK-02-17 Rail Component

DryLin N Thin Linear Guide (Non-Lubricated Type) TK-01 Rail Unit

Cap for filling of guide rail bolt holes (S type and SE type applicable)

[Features]
·
· A dedicated cap for preventing dust and other contaminants from entering the bolt holes used to mount guide rails.

Oilless slide shifter BA type (BTSA)

A roundtrip linear movement guide unit with excellent resistance to abrasion, loading, and contaminants.
[Features]
· Uses an aluminum housing. Compact and lightweight design. Can be used in any orientation such as horizontal or vertical.

Oilless slide shifter (BTU)

A roundtrip linear movement guide unit with excellent resistance to abrasion, loading, and contaminants.
[Features]
· High rigidity for strength, with an integrated shift table, guide shaft, and shaft support structure. This unit provides excellent durability.

Oilless #500 guide unit BK type

A dedicated roundtrip movement guide unit with high durability that uses an OILES bearing in the slide part.
[Features]
· A guide unit with high rigidity for strength. Products are available in a wide range of internal diameter and length measurements. Can also be used for pilot positioning.

Stopper (ST)

An optional component compatible with BT/BK OILES guide units.
[Features]
· This stopper (ST standard) is used when making contact with the tip surface of the shifter sleeve’s main body, and has undergone quenching.